Enamel detachment device MKEN-100
Enamel detachment device
FOR FLAT WIRE COIL
MKEN-100
This is a desktop stripper for removing coated enamels from the both sides (top and bottom) of lead part of the flat wire coil at a time by its rotary cutter blade for soldering joint.
By using the rotary cutter blade specially made by us, you will be able to get a sharp and clean finish, and also applicable to a various kinds of object.
FEATURES
Easily and flexibly adjustable to the thickness of wire by setting up APPLICABLE MATERIALS on the touch-panel control.
Strippable adjacent to the outside of the coil up to 2.0 mm.
Safe moving of the coil with the fixture tool.
Using a special individual fixture tool for each of coil.
Simple and safe replacement of rotary blade by using the special attachment
No air operation – only use of electrical power source.
OPTION & SPARE PARTS
1.Fixture is designed and manufactured by your requirement.
Please submit your samples , when ordering
2.Remarks:
(1)We will offer a fully automatic stripping machine if required.
(2)An upper grade stripper, Model MKEN-100E, with automatic transfer, adjustable speed is available
SPECIFICATION (unit, mm)
|
Machine Model |
MKEN-100 |
|
Coil (wire) Moving |
By hand. with end stopper |
|
Stripping width |
Min. 0.0037mm by pulse motor |
|
Width of wire |
Max. 10 |
|
Thickness of wire |
0.15 to 3.00 |
|
Moving stroke |
Max. 60 |
|
Outer diameter of coil |
Max.30 |
|
Inner diameter of coil |
Max. 16 |
|
Angle of lead wire |
between 0°to 180° |
|
Cycle time |
5.0 sec./cycle except setting time |
|
Control |
PLC |
|
Power source |
AC 100V 50/60 Hz |
|
Machine dimension* |
400W×300D×250H |
|
Weight [kg] |
15 |
