Schleuniger StripCrimp SC 30 Pneumatic Stripping and Crimping machine

Schleuniger StripCrimp SC 30 Pneumatic Stripping and Crimping machine

Schleuniger StripCrimp SC 30 Application

The pneumatic StripCrimp SC 30 is a highly reliable stripping-and crimping machine for the processing of side feed and rear feed terminals. The StripCrimp SC 30 processes all banded terminals with cross sections from 0,03-1,5 mm2 (AWG 32–16).

The machine concept incorporates a toggle press; meaning that both upper and lower parts of the applicator move towards each other. Precision stripping and gas tight crimps (certified with cross-section and test record if requested) guarantee maximum processing quality.
 

The StripCrimp SC 30 has a small footprint and compact size allowing it to be used in many working areas.

The machine follow on base Schleuniger PP3 ideas.

Additional Features

·Automatic trigger sensor for faultless operation and high cycle time

·Optional CrimpForce monitoring
·Special blades for smaller cross sections as well as thin-walled or extremely tough insulation
·Compatible to all mechanical Schleuniger PP3 tools left version and pneumatic tools KrimpSystems
 

Schleuniger StripCrimp SC 30 Technical Specifications

Wire Size                 0,03–1,5 mm2 (AWG 32–16)
Stripping Length         max. 12 mm (0.48")
Breakout Side Feed Applicator min. 15 mm (0.59") (application dependent)
Breakout Rear Feed Applicator min. 11 mm (0.43") (application dependent)
Crimp height setting         0,04 mm (optional 0,02 mm)
Reel Width (max.)         190 mm (7.4")
Reel Diameter (max.)         750 mm (29.5") / (Standard)
Production rate                 approx. 3 000 cycles/h
Air Pressure                 4 – 6 bar
Air Consumption                 1,45 NL (5 bar)
Noise Level                 < 75 dBA
Options                         CrimpForce monitoring ACO incl. software WinCrimp
                         Different Gripper type: plasma surface, for short stripping
                         Contact Oiler
Dimensions (LxWxH)         250 x 220 x 450 mm (9.9 x 8.7 x 17.7”)
Weight 16 kg (35.2 lbs.)
CE-Compatibility The StripCrimp SC 30 fully complies with the CE-guidelines
                 (mechanical safety).
Important Notice The producer recommends that wire samples be submitted
                 in cases where there is doubt as to the processing
                 capabilities of a particular machine.
Sales and Service by: Production: KrimpSystems s.r.o.,
                 Sales office:
                 SENO spol. s r.o.,
                 provozovna Pribram
                 Husova 424, CZ-261 01 Pribram VI
                 e-mail:

索铌格Schleuniger StripCrimp SC 30相关产品
索铌格Schleuniger全自动切断剥皮机：EcoStrip 9300/EcoStrip 9320/EcoStrip 9380/EcoStrip 9480/PowerStrip 9550/PowerStrip 9500/MegaStrip 9650
索铌格气动线缆剥皮机：JS8400\JS8310\US2100\US2015\US2300\US2500\US2600/2600RI
索铌格Schleuniger切线机：EcoCut 3200/EcoCut 3300/PowerCut 3700/ShieldCut 8100
索铌格Schleuniger光钎剥皮机：FO7010/FS7030/UniStrip 2545
索铌格Schleuniger半钢性同轴电缆剥皮机SemiRigid 1050
StripCrimp 30/半自动压接机StripCrimp 200/剥皮压接机StripCrimp 750/StripCrimp LPC