巨无霸数控浮雕石材雕刻机（JWB）是一款擅长石材浮雕加工的雕刻机。在加工大理石、青石、人造石、玉石、仿古砖、砂岩等硬度小于5.5的石材时，比重型石材机要快70%以上甚至更高；在对花岗岩等高硬度材质进行线雕、阴雕、刻字、铣底等加工时也稍胜一筹。
JWB浮雕石材雕刻机“独有”优势：拥有“一大改进，一项专利”的石材雕刻机。“一大改进”将传统石材雕刻机的机床结构进行了改进，称之为新型意大利结构，有效的提高了机器性能（机械稳定性、加工速度、降低刀具损耗、机械强度）。“一项专利”配备了“下沉式双层隔离分水系统”，又称“漏沙台面”或“免清洗台面；可省去每天清理台面的时间。
意大利结构优势：
1.提高石材雕刻机运行的稳定性，减小雕刻力矩，降低断刀烧刀概率，提高加工效率。
2.有效提高单次下刀深度，进行深浮雕加工时，可以成倍提高加工效率。普通青石、大理石、砂岩等单次下刀深度可达80mm。
3.有效提升石材雕刻机的极限运行速度，为机器实际运行速度提供保证。出厂空程速度可达20M/min，加工速度可达15M/min。
Henan Juwuba CNC Equipment co.ltd is a excellent enterprise of science and technology in Henan Province, and its headquarters is based in Zhengzhou. This company committed to R&D manufacturing all kinds of CNC equipment, including woodworking MC, MFC furniture of production lines, stone engraving machine, carpentry engraving machine, advertising equipments beltline and so on, and its major products are “JWB” woodworking, stone, “Kaopu” series in advertising full set of equipment, “Suba” high-end series in MFC furniture of production lines.
At present, the company's products have been selling in medium cities and regions all over the country, such as Henan, Beijing, Anhui, Hubei, Hunan, Chongqing, Guangdong, Yunnan, Shanxi, Xinjiang. And some products are exported to Southeast Asia, the Middle East, Africa, Europe，the United States and other places. This company has brought benefits for more than 800 factories with its excellent quality, excellent performance and perfect after-sales service, and won the customers’ approval.
In this company, there are more than 85% staffs have Bachelor degree or above, and it has a strong R&D team and after-sales service capacity. Besides, it’s operation principle is 'integrity is the fundamental, quality is the insurance, innovation is the tool'. Most important of all, they willing to work with people from all walks of life hand in hand cooperation, mutual trust and win-win and develop together.
巨无霸数控石材雕刻机耐用{gx}性：
采用zmpp台湾银泰X/Y-25 Z-20原装直线方轨，双排原装滑块，运行平稳、精度高、机械寿命长；
采用gd盒装小模数精密斜齿传动，啮合面积大，重合度高，有效保证精度和力量；
采用5.5KW双轴承靖江华雕恒转矩主轴，是国内质量最稳定的品牌之一；
Y轴双电机驱动，采用混合伺fu驱动系统，增强动力，xjb高；
机箱及每个驱动电机都配备自冷却散热风扇有效降低电机故障率及不稳定因素，增加雕刻机驱动电机寿命；
采用梯形钢管无缝焊接支撑架，台面横撑钢管加厚处理，横撑间距40cm左右，增加承重能力；机器重要位置均为8mm厚钢管，不易变形，增加耐用性。
标配说明：（未提到的内容请参上文↑）
采用专用的5.5KW/3.2KW水冷主轴，故障率相对略高；
专用耐高温450B大功率步进电机及大功率步进驱动器，不易超长时间工作（连续使用小于10~24小时根据工作环境），电机动力相对高配略小；（国内70%的雕刻机采用普通步进电机，故障率相对于专用步进电机略高）
采用盗版维宏控制系统，系统稳定性相对较差，相对于正版维宏控制系统方便易用性上不是很好。（国内80%的雕刻机用户依然在使用这种系统）
