P-A0、P-B0实验室气压型助剂整理小轧车
P-A0、P-B0 small padder
用途Application
可利用此机,选择整理助剂浓度的品质好坏.适用于染整厂、助剂、颜料制造厂。
Select the concentration quality of auxiliary ,which is applicable for dyeing and finishing plant , manufacturer of auxiliary and dye .
技术特点Features:
1.以压缩空气推动气缸.使压力均衡,且经久使用后,压力的再现性良好。
2.罗拉目前的使用硬度72度,压吸率在45%~90%之间适用布范围广,应用广泛。
3.小轧车要比同行业安全性能佳,马达转动加装正反转功能,转动控制可用手动或脚动来互换控制,对操作者安全.特殊装置效率高又安全不会夹到手指。除主架外,其他均是不锈钢制成。
1.To promote the membrane by compressing the air; make the pressure balanced .The pressure reappearance is still in good working order after long time using.
2.The hardness of roller is 72 degree and pressure-absorbing rate is from 45% to 90%.
3.With better safety and reciprocal rotating of motor ,the small padder can be operated either by hand or foot ,which makes the operator much safer . The special device with high efficiency is designed for safe operation and used to prevent the finger to be clamped. All the other parts are made of stainless steel except the framework .
技术参数 Technical Parameters
1.压吸罗拉采用进口材料,外部被覆N,B,R,橡胶再加以精密研磨完成,硬度为邵氏72度。
2.橡胶罗拉直径为130mm,长度为430mm。左右压力可独立调整,压力范围0-7kg。
3. 采用3相370V电机转动,转速可调节。
4.二组压力指示计,二组压力调节阀。
5.空压机为选购设备。
6.外形尺寸L*W*H:P-AO 920*650*1250mm,P-BO 870*650*1100mm。
1.Pressure absorbing roller with 72 degree of hardness , is made of imported materials and covered by N,B,R, and rubber ; then be abraded.
2.The diameter of rubber roller is 130mm and the length is 430mm.Right and left pressure or independent adjustment with the pressure range between 0-7kg.
3.The three-phase 380V370W motor rotation,speed adjustable.
4.Group two pressure indicating meter,group two pressure adjustment valve.
5.Air compressor is an optional equipment.
6.Dimensions L*W*H(mm):P-AO 920*650*1250,P-BO 870*650*1100.