1、 Structure of platform shelf
1. The overall structure of the platform shelf is assembled without on-site welding, which is beautiful and generous as a whole. Compared with concrete structure or section steel structure, because the ground floor shelf itself plays the supporting role of the upper floor, it has the advantages of low cost and high space utilization.
2. The platform type shelf panel has flat plate, checkered steel plate, punched steel plate and other varieties to meet the different use requirements of fire prevention, ventilation, lighting and so on. Forklift, hydraulic lifting platform, cargo elevator and other methods can be selected for the upper and lower floors of goods; The transportation of goods on the same floor is usually completed by small trolleys.
3. Platform type shelves usually have a bearing capacity of 300kg ~ 1000kg / m2, and round pipes with strong bearing capacity and less steel consumption shall be selected for columns; The primary and secondary beams can select the most economical and reasonable H-section steel in steel structure engineering and the special steel platform C-shaped cold-formed beam developed by Saxony company according to the bearing needs.
4. The special C-type cold-formed checkered steel plate or hollow board specially used by Saxony is selected for the floor panel of the platform shelf, which adopts the gusset plate structure and is fixed with the primary and secondary beams. The whole platform structure has strong integrity. Different floor panels can be selected according to the actual needs to meet the requirements of fire fighting, dust prevention and small parts falling prevention. Lighting system can also be configured under the floor as required.
2、 Characteristics of platform shelf
1. Storage height to increase space utilization; Suitable for manual access of various goods; Generally, the platform shelf is divided into 2-3 layers, with a load of 300 to 1000kg / square; The goods on the first floor of the shelf are heavy. Generally, 500kg beams are placed on each floor, and the walking tools are manual carts or manual hydraulic carts; The goods on the shelves on the 2nd-3rd floors are generally placed on the beam of 300kg on each floor, and the walking tools are mostly manual carts.
2. Transportation means between buildings: lifting platform, elevator, conveyor belt or forklift; The cargo passage usually needs additional facilities: self-locking, electrical lighting, fire prevention, etc; Simple installation, professional installation instructions.
3. The special C-shaped cold-formed checkered steel plate or hollow plate is selected for the floor panel of the platform shelf, which adopts the gusset plate structure and is fixed with the primary and secondary beams. The whole platform structure has strong integrity. Different floor panels can be selected according to the actual needs to meet the requirements of fire fighting, dust prevention and small parts falling.
Scope of application:
If the storage or logistics center has the following characteristics, the platform shelf system can be considered:
1. The quantity of goods stored is large and there are many kinds of goods, mainly manual pickup;
2. The storage and logistics center urgently needs to increase the number of storage spaces or require a certain storage capacity;
3. Logistics efficiency requires a high level.
4. The available clear height of the warehouse is high, ranging from 4.2m to 6.5m
