增压泵具有以下特点:
维护简单:增压泵的零件及密封少,维护简单且成本低着一起复增压。
xjb高:增压泵具有输出性能高而成本低的特性。
可调性强:增压泵输出压力和流量都由驱动气体的压力调节阀准确地调节。
调节驱动气压,使气压管道增压泵的输出压力在预增气压和{zd0}输出压力之间jq调整。
输出压力高:气动液体管道增压泵的{zg}工作压力可达到700Mpa,气动气体管道增压泵的{zg}工作压力可达到300
Mpa。
材质优良:增压泵高压部分材质为硬质铝合金。高压柱塞材质为不锈钢。并采用双层密封。关键部位材质可以根据介质性制选配。
多种气体驱动:压缩空气、氮气、水蒸汽等。
输出流量大:气动管道增压泵只需0.2—0.8Mpa压缩空。相同系列泵的所有“O”型圈,维修包易损部件可相互替换,大大降低了维修成本。气动管道增压泵无需使用润滑剂。
应用灵活:增压泵从简单的手工*作到全自动化*作,增压泵适用于各个应用领域,并方便与客户的系统配套兼容。在同一系列里的大多数型号的泵的空气马达是可互换的。
Booster pump with the following characteristics:
Maintenance simple: booster fewer parts and sealed, maintenance is simple and low cost together with the resumption of pressurization.
Cost-effective: booster pump output and low-cost high-performance features.
Adjustable strong: booster pump output pressure and flow driven by the pressure of the gas control valve to accurately adjust.
Regulation-driven pressure, so that the output pressure booster pump pressure pipeline in the pre-pressure and maximum output by the pressure between the fine-tuning.
High output pressure: pneumatic liquid pipeline booster pump maximum working pressure can be achieved 700Mpa, pneumatic gas pipeline booster pump maximum working pressure up to 300 Mpa.
Excellent material: high pressure booster pump for some hard aluminum alloy material. Stainless steel material for high-pressure plunger. And double-sealed. Materials can be key parts of the system based on media placement.
A variety of gas-driven: the compressed air, nitrogen, such as water vapor.
Output flow: pneumatic pipeline booster pump only 0.2-0.8Mpa Compressed air. All the same series of pump "O"-ring, maintenance package to replace vulnerable components to each other, greatly reduced maintenance costs. Pneumatic pipe without the use of booster pump lubricant.
Flexible application: from simple hand pump * do * make a fully automated, applicable to each booster pump applications, and facilitate customer-compatible systems. In the same series where the majority of models of the air pump motor is interchangeable.
已投稿到: |
|
---|