模具工业协会，上海，普刘秘书长认为，我们国家的未来将呈现sd发展趋势模具：
首先，越来越多的大型模具。这是因为越来越大，模具成型零件和高生产的“一模多腔所造成的”效率的要求。
二，模具的精度越来越多。 10年前，精密模具的精度一般为5微米，现在已达到2至3微米，不久1微米精度的模具将上市。这要求超精加工。
三个多功能复合将得到进一步发展模具。新型多功能复合材料成型模具除了冲压件，还担负叠压，攻丝，铆接和锁紧等组装任务，对钢材的性能要求也越来越高。
四是热流道模具在塑料模具中的比重将逐渐增加。作为模具热流道技术，因此可以提高生产率和零件质量，能产生大量节省原材料，因此热流道技术的应用发展在国外非常迅速，许多塑料模具和塑料模具厂生产的多有50多道技术通量，一些制造商达到80％以上的使用率，效果十分明显。热流道模具已在中国生产，一些企业使用上升到20％?30％。
5人形成与不断完善和发展，气体加工塑料辅助模具及适应高压注塑成型过程将遵循模具的开发。这种僵化的良好模性，高压力，要求，特别是在精密模具型腔应淬火，浇口印章，模具温度控制精度，使模具钢的性能要求非常严格。
六人是标准件的应用将更加广泛。标准化的模具和模具标准件的应用将大大影响模具制造周期，而且可以提高模具质量和降低模具制造成本。因此，模具中的应用“十五”期间的标准件将是一个更大的发展。
七顷快速经济模具的前景是非常大的领域。现在是多元时代品种小批量生产，21世纪，这种生产方式占工业生产的比重将达到75％以上。因此，一方面，缩短产品的生命周期，另一方面是，在频繁变动模式需要模具的生产周期越短越好。因此，模具的快速经济发展越来越令人担忧。随着
八个汽车及其他产品的轻量化发展，压铸模具将继续改善的比例，而模具寿命压铸模具和复杂性也将不断增长的需求。
9钢塑料的塑料，以进一步加快木材加工，塑料模具将继续增加比例。同时，由于机械零件和塑料模具的精度不断提高的要求越来越高的复杂性。
十个模具技术将继续改善gd模具的比例将继续增加，这是模具产品结构调整，市场变化造成的。 06.9.5
Chinas Top Ten Hardware Mold Market Development Trend
Die Mold Industry Association, Shanghai, Pu Liu Secretary-General believes that the future of our country would show the top ten mold development trends:
First, the increasingly large-scale mold. This is because the mold forming increasingly large parts and high production efficiency requirements of the caused by.
Second, the precision of mold growing. Ten years ago, the accuracy of precision molds is generally 5 microns, and now has reached 2 to 3 microns, the near 1 micron precision mold will be listed. This requires Superfinishing.
three are multi-functional compound will be further developed mold. New multi-functional composite molding mold parts apart from stamping, but also shoulder叠压, tapping, riveting, and the locking assembly, such as mission, the performance requirements of steel are also getting higher and higher.
four hot runner molds are in the plastic mold in a gradual increase in the proportion. As a result of the mold hot runner technology can improve productivity and quality of parts and can produce substantial savings in raw materials, therefore the application of hot runner technology has developed very rapidly in a foreign country, and many plastic mold plastic mold factory produced more than half a flux Road technology, some manufacturers to achieve more than 80% utilization rate, the effect is very obvious. Hot runner mold has been produced in China, some enterprises usage rose to 20% ~ 30%.
five are with the plastic forming process of continuous improvement and development, gas-assisted mold and adapt to high-pressure injection molding processes will follow the development of mold. Such rigid requirements of a good mold resistance, high pressure, especially in precision mold cavity should be quenched, gate seal, and mold temperature control accuracy, so die steel very strict performance requirements.
six are standard parts of the application will be more extensive. Standardized mold and mold standard parts of the application will be significantly affected by mold manufacturing cycle, and can improve quality and reduce mold mold manufacturing costs. Therefore, the application of mold standard parts in the period will be a larger development.
seven are the prospects for rapid economic mold a very big field. Now is the era of multi-variety small batch production, the 21st century, this mode of production accounted for the proportion of industrial production will reach above 75%. Thus, on the one hand, to shorten the life cycle of products are on the other hand, frequent changes in patterns require mold production cycle the shorter the better. Therefore the development of rapid economic mold will become more and more cause for concern. With
eight are motor vehicles and other products to the development of lightweight, die-casting mold will continue to improve the ratio, while the life of die-casting mold and complexity will also be made ever-increasing demands.
nine steel is plastic to plastic to further accelerate the process of wood, plastic mold will continue to increase the ratio. At the same time, due to the complexity of the mechanical parts and precision of the continuous improvement of plastic mold the requirements of increasingly high.
are ten mold technology will continue to improve, in the proportion of high-grade mold will continue to increase, which is caused by structural adjustment Products Mold market changes. (06-9-5)