搜产品
搜企业
客服电话：400-000-8722
Smart clothes racks have spread to our lives, and the installation of racks is a very important part. The following intelligent clothes hanger manufacturers will explain to you how to install intelligent clothes hangers:
1, installed in the balcony on the right hand, to decide according to users' height, fixed with a screwdriver.
2. Measure the diameter of the lamp, then measure the distance between the light and the edge of the balcony. According to this measurement, the width of the top seat can be determined.
3, the installation angle remains on the same vertical line in the balcony at the top and handle device.
4, intelligent clothes hanger with two wire, first took a, first put the wire head through the wire slot through the upper part of the steel wire groove of bearing seat, bearing steel wire groove and perpendicular to the ground, the top wire and card set into the top seat. The other end of the steel wire passes through the bearing steel groove, and the other hole passes through the lower seat of the bearing steel wire groove seat, and the steel wire is vertical to the ground, and the top seat is sheathed and clamped.
5, wearing a lob and knotted, then pull the top ball seat above the corner and pull out wire end card in hand, to relax the wire lob decline, then through the lob and fixed pole set screws, install the plug.