Vertical cold chamber die casting machine features

(1) suitable for zinc, aluminum, magnesium, copper and other alloy die-casting;

(2) less dosage in the production site, and the majority of minicomputers;

(3) the pressure chamber is vertically placed, the metal liquid is poured into the pressure chamber, the gas is above the molten metal, and the wrapping gas is less during the injection process;

(4) There are more transitions after the injection pressure, so that the pressure transmission is affected, especially in the pressurization stage, the pressure is not sufficiently transmitted due to the smaller orifice at the nozzle inlet;

(5) Convenient to open the center gate;

(6) The length of the machine covers a smaller area, but the height of the machine is relatively high;

(7) When punching the molten metal under the punching part, the work of eliminating the trouble is inconvenient;

(8) There are procedures in the production operation that cut off the extra cake and give the cake, and reduce the production efficiency;

(9) Add the procedure of taking excess cake from the top surface of the lower punch when using automatic operation.

Horizontal cold chamber die-casting machine features (1) suitable for a variety of non-ferrous alloys and ferrous metals (currently not yet common) die-casting;

(2) the size of the machine is more complete model;

(3) few production operations and simple, high production efficiency, and easy to automate;

(4) The injection machine position easier to adjust to accommodate the creation of eccentric gate, you can also use the center gate, this time the mold structure to take appropriate measures;

(5) injection system has a high technical content;

(6) The injection process of grading, segmentation obvious and easy to achieve, to a large extent to meet the different requirements of die-casting process to adapt to the production of various types and requirements of the die-casting;

(7) pressure transfer process less pressure transfer transition;

(8) pressure room metal liquid level above the surface contact with air larger, easy injection into the air and oxidation inclusions; for high demand or special requirements of die-casting, through the appropriate measures can still be more satisfied the result of.