您好,欢迎来到中国企业库   [请登陆]  [免费注册]
小程序  
APP  
微信公众号  
手机版  
 [ 免责声明 ]     [ 举报 ]
企业库
搜产品 搜企业
客服电话:400-000-8722
企业库首页>资讯
行业
广告

PU革服装如何保养和清洁? « Live in China 混在中国

作者:企业资讯策划团队 来源:rwfb 发布时间:2010-07-23 浏览:678

问:
PU革服装,也做干洗?
洗涤剂擦什么好?
有维护技巧?

答:
皮革如何做艰苦
[返回]
随着冬季来临
,气温下降,对各种裘皮制品,将有硬毛的现象,说明如下可机管局软方法。

采取硝酸盐发硬毛皮产品,可用于池氮化两个籼稻面粉1份3冷水(Cool-Water)比例副本复制到解决方案,将毛皮皮台式机主板上的瓦片之前喷洒冷水(Cool-Water)使皮肤湿润板,然后用刷子伸进解决方案,即使刷皮肤董事会,提出了23分,一边刷好后,然后是第二次刷牙,所以重复35次。干擦均匀后,皮肤板可以软化和灵活。

也有可用的测试和明矾水(500克水,若试验5克,明矾10克)。纸碟将干湿即使在擦,即恢复柔软。毛皮大衣为烧结硬化的主要原因是潮湿造成皮毛的灰尘凝聚,因此,必须毛皮大衣挂在阴凉,通风良好的地方去除水分,然后击败了皮毛光滑竹脚几次下来,然后顺发势顶竹尺梳刮几次,然后摩托车到软土效果。

皮革染色和维护基本知识

[返回]
随着时间的推移皮革服装,皮革和面料将受染色,光滑皮革表面涂层不同程度的受到一定的磨损,撕裂甚至开裂浆,出浆,在这种现象最终暴露,使原来的皮革失去光泽,变得脏旧。如果你不及时和染色维修不仅会影响他们的外表和干净的衣服,而且还影响其生活,但对纺织品染色皮革服装和一般维修不一样,它需要有一定的专业知识在皮革。

那么究竟是什么皮革保养?这个问题不是每个消费者都清楚的。穿着肮脏的皮革家具,旧,以便再作更改为新的家具一样,你必须重新油漆家具。皮革保养和类似,是用颜料,树脂及其他化学物质被称为特殊的皮革涂饰浆,在对旧的皮革服装重新整理,可以允许访问美丽的光泽皮革和舒适(Schick)的感觉,发挥了美化和保护皮革的作用,让生命可以延长皮革。这就是常说的皮革保养。阿皮革得到合理的,如果正确的维护,处长使用寿命两倍甚至更多。反之,如果保养得宜,它将使柔软和舒适(Schick)的皮革僵硬,粘,塑料的感觉,以加强等,生活也会大打折扣。

据了解,几乎所有种类的洗衣所有皮革维修服务,但真正的专业知识与皮革,有几个员工,谁大多从一些皮革使用基于良好涂层浆料商店购买的直接交易有的干脆不扎实彩色处理。由于这些学员大多数人都不理解专业知识,无论是部署方面,而不是全彩色,在许多问题造成的维修之后发生的皮革。从皮革投诉的问题可以看出,有最有问题后,皮革保养,有些觉得干,头发硬,有的涂层厚,粘头发的感觉僵硬,塑料感强,浅色xx出现市民花,色差严重,一些湿纸巾一个人的肤色。

在此,建议时,大多数消费者关心皮革,{zh0}去专业的皮革制造商指定的维修店或专业皮革染色社区(Society)店。

皮革保养的基本程序:一般情况下,顺利皮革保养必须先清洗,颜色上,完成了三个过程。

1,清洗的污渍对皮革染色前必须清洗,容易把背景色前盖肮脏的旧颜色。衣服上的污渍一般汗液分泌,石油和灰尘和3色素污染的各种不同类型。其中有些溶于水,和一些有机溶剂,以及两者没有解散。

化学去污的有四个基本原则
(1)乳化(2)恢复(3)氧化应激(4)解散的作用。因此,洗涤和清洁剂,应在染色选择类型的选择。

通常情况下,皮革洗手可分为干式洗车和两种方式清洗机。

1。洗手用干净棉布或棉球蘸清洁剂将直接在擦洗的办法,以皮革表面的污渍。通常没有对皮革的一些机洗条件下,一旦宝宝不太脏采取洗涤方法。

常用的清洁用品(1),氨,酒精和水的混合物(2)一些弱碱性清洗剂(3)一些特殊的皮革清洗剂。一些年来的宝宝不脏的皮革可以用来(1),(2)两个清洁材料,廉价和容易类型。对于较脏衣服或一些光色皮革,{zh0}是选择有针对性的特殊皮革清洁效果更好一些,但一些成本较高。

2。指的是衣服干洗的干洗机机,具有一种有机溶剂清洗。其优点是既干净皮革衬里污垢清洗污垢的同时,xx率比手工清洗。私人消费开支有权删除油性污渍的坚强力量。有4个常用的氯乙烯,xxxx,三氯乙烯四氯乙烯。个人消费支出占消费支出的主导地位,在各种因素个人消费支出(xx,去污力,可回收能力)来说,四氯乙烯是较为理想的,它被广泛认为是洗衣店使用四氯乙烯。但是,私人消费开支有一定的毒性,其洗衣机要求较高的密封系统。他们的机器和室外空气四氯乙烯浓度必须控制在100ppm的符合xx标准。有时是很难去除一些特殊的个人消费支出仅污渍,往往需要添加一些使用干洗整个添加剂,如洗涤添加剂,洗涤剂等。在选择个人消费支出,应根据需要确定。干洗,为了避免皮革中石油已在“提取”的使用权一般与低温,短期快干硬皮革头发,损失四氯乙烯。通过这种方式,避免在石油皮革损失,而且是机械作用的结果,以防止隐患责成皮革干洗机设备投资过度变形,但规模更大,更昂贵。是否洗手或干洗机,但应充分清洗,然后颜色。特别是对衣{lx}口,以及特别秀娣肮脏的网站,应侧重于xx,洗数可以洗掉的数量,然后通过颜色覆盖,特别是浅色皮革。

2,彩色皮革清洁,一般应光滑皮革颜色,专业的“完成”之称。是使用涂料,树脂,皮革等基于被称为特殊涂层浆料,以刷,擦,喷涂材料的皮革表面,应用方式等。整理是到好坏的关键是皮革和维修质量。皮革和维修,应该怎样做,我们必须了解的材料都使用的特点,并制定合理数量的奶粉后会有皮革质量的维护。如果维修后的皮革处理,光泽度比以前更好的水平,显示整理的公式是合理的,另一方面,头发保养皮革后感到非常困难,粘,表明不当涂料配方。通常,颜色必须进行颜色之前,试颜色,然后整理,纯色。

1。颜色的皮革颜色之前,首先要颜色。所谓的颜色,是使用一些基本的奶油,先请与基本相同,主要颜色皮革的颜色,然后传送副色调(色头),直到颜色和皮革非常相似,平了少量的树脂,彻底后,皮革在角落,不转让涂层与奶油混合的显眼地方,干观察涂层的颜色和皮革颜色差不多,颜色,只有在非常接近完成。树脂也可用于直接与良好的颜色和测试的颜色,所以这是基本的着色剂方便,xx的色彩。

2。整理整理前应首先良好的奶油和树脂传递按一定比例(通常是比颜料和树脂1:2-2.5良好调匀),然后以颜色。

通常采取的整理方法刷牙,涂料,喷涂3种安排。

(1)刷:指板刷使用低到涂料浆直接向加工方法对皮革表面刷。刷在毛孔,在充分渗透和吸收角落和缝隙帮助泥浆。

(2)安排将涂:指海绵伸进涂料浆直接抹了一对皮革加工方法捕获的表面。擦拭薄膜涂层,也有利于泥浆渗透,但弯道是不容易吃进灌浆关节,容易出现“{zh1}路。”

(3)喷涂:指喷枪喷涂泥浆的一皮革表面涂层的方法,直接。这种方法更多的刷牙,安排将涂有更高的效率,而且也避免刷牙和涂布印刷擦拭痕迹,颜色均匀。但是,当为街角地盘皮革衬里喷洒不是一个好喷,易污染的衬里。时通常采取一种更好的方式喷刷。右键的皮革欲望,而且固色处理,以防止褪色。固定常用甲醛,光油,交联剂材料。由于与交联剂固色,一般交联剂添加在涂料浆直接。皮革着色后,如身体或周围的皱纹形成的主要部分,{zh0}使用熨烫处理,使之更平滑的外观铁。熨烫,{zh0}是在一个丝绸垫皮革表面,整烫在80-100℃之间更好的,每处熨烫时温度控制不应太长,以防止加热后的油漆涂料一些“移民“和导致色花,浅色xx,特别是要注意。{zh1},还应当按钮的颜色受感染的部分擦用湿布过后再付款。

答:
最简单的方法是去超市买一“墙郎”的名单上喷磨

pu leather clothes how maintenance and cleaning?

Question:
PU leather clothes have to do dry cleaning?
what detergent wipe good?
have maintenance tips?

Answer:
leather hard of how to do

[Back]
With the approach of winter, temperatures drop, all kinds of fur products, there will be hard hair phenomenon, described below can be made of a a soft approach.

take nitrate-fat hard fur products, can be used Chi-NOx two copies of indica rice flour 1 copies 3 copies of the proportion of cold water into solution, would be gross Pipi board tiles on the desktop up before spraying cold water to make moist skin panels, and then use brush dipped into the solution, even brushing the skin board, put it aside for 23 hours after a good brush, and then a second brushing, and so to repeat 35 times. Dry rub evenly later, skin panels can be softened and flexible.

There is also available tests and alum water (500 grams of water, if the pilot 5 grams, 10 grams of alum). Paper plates will be wet and dry even after the rub, that is, to restore softness. The fur fur coat hardens the main reason for agglomeration is the fur damp caused by condensation of the dirt and, therefore, need to be fur coat hanging in a cool, well-ventilated place to remove moisture, and then beat the fur smooth bamboo foot several times, and then shun Potential top-down hair comb scraping bamboo foot several times, then Scooter to the effect of soft dirt.

leather dyeing and maintenance of basic knowledge

[Back]
 leather wear over time, the leather and the lining will be subject to different levels of stain, smooth leather surface coating will be subject to certain wear and tear or even cracking slurry, out pulp, exposed at the end of such phenomena, so that the original leather to lose luster, becoming dirty old. If you do not timely and dyeing maintenance will not only affect the appearance of their dress and clean, but also affect its life, but the leather of the dyeing of textiles clothing and general maintenance are not the same, it needs to have a certain expertise in leather.

So what is it leather care? This problem is not every consumer is clear. Wearing dirty leather furniture the same as the old, in order to make another change to the new furniture, you have to re-paint furniture. Leather maintenance and similar, is to use pigments, resins and other chemical materials dubbed special leather coating slurry, in the wear on the old leather re-finishing, you can allow access to the beautiful shiny leather and comfortable feel, played beautify and protect the leather The role, so that life can be extended leather. This is often said that the maintenance of leather. A leather can get a reasonable, if the correct maintenance, the useful life of the Director of twice or even more. Conversely, if maintained properly, it will make a soft and comfortable leather stiff, sticky, plastic feel to enhance and so on, life will be little.

It is understood that almost all kinds of laundry all leather maintenance services, but the real expertise to do with the leather, there are few employees, who mostly use from a number of leather-based dealer with a good coating slurry store bought directly Some simply do not do solid color processing. Since most of these practitioners do not understand professional knowledge, neither the deployment side, not full-color, resulting in maintenance of many problems occur after the leather. The issue of complaints from the leather can see, there is the maintenance of the most problematic after the leather, and some feel dry, hair hard; some coating thick, sticky hair feeling stiff, plastic feeling strong, light-colored leather appears the public flower, Component serious; some wet wipe one s complexion.

In this, it is recommended when the majority of consumers care leather, it is good to go professional leather manufacturer specified maintenance shop or the community of professional leather dyeing shop.

leather maintenance of the basic procedures: In general, smooth leather maintenance must first be cleaned, color, finishing the three processes.

1, cleaning of stains on the leather must be cleaned before coloring, easy to put dirty old color before the background color cover. The stains on the clothes are generally sweat secretion, a variety of oil and dust and a variety of three types of pigment contamination. Some of them dissolve in water, and some soluble in organic solvents, as well as the two are not dissolved.

the general principles of chemical decontamination There are four
(1) emulsification (2) to restore the role of the (3) oxidative stress (4) dissolution. Therefore, the choice of washing and detergents should be based on the type of stain to choose.

Typically, leather hand-washing can be divided into type washing and dry cleaning machines in two ways.

1. Hand washing is with a clean cotton cloth or cotton ball dipped into the cleaning agent directly on the leather surface stains for a way to scrub. Generally do not have machine wash conditions, for some of the leather once the child is not too dirty to take a washing method.

commonly used cleaning materials (1), ammonia, alcohol and water mixture (2) some weak alkaline cleaning agent (3) some special leather cleaning agent. For some years the child does not dirty the leather can be used (1), (2) two types of cleaning materials, cheap and easy to get. For some of the more dirty clothes or light-colored leather, it is best to select a number of targeted special leather cleaner effect is better, but some costs are higher.

2. Refers to the clothes dry-cleaning machines in the dry-cleaning machines, washing with organic solvents a way. The advantage is both clean leather dirt while cleaning lining dirt, and high-efficient than manual cleaning. PCE right to remove oily stains stronger force. There are four commonly used PCE in vinyl chloride, carbon tetrachloride, trichlorethylene. PCE PCE which accounted for the dominant position, for PCE in the various elements (security, detergency, recyclable capacity) is concerned, PCE is more ideal, it is widely used as a laundry PCE. However, PCE have a certain toxicity, its washing machines require a higher sealing system. Their machines and outdoor air in the PCE concentration must be controlled within 100PPM can meet safety standards. Sometimes it is difficult to remove PCE alone some special stains, often need to add some dry-cleaning additives for use with the whole, such as washing additives, detergents and so on. PCE in the choice should be based on needs determined. Dry Cleaning, in order to avoid the leather in the oil has been PCE in extract the loss of the right to use hard-leather hair, generally with low-temperature, short-term quick dry. In this way, avoiding the loss of leather in oil, but also a result of mechanical action to prevent excessive deformation of the hidden danger oblige leather dry cleaning machinery equipment investment, but larger, more costly. Whether hand-washing or dry cleaning machines, there should be fully cleaned and then to color. Especially for collars cuffs, and special Xiudi dirty site, should focus on treatment, the number of washing can be washed off the number, and then through the color to cover, especially light-colored leather.

2, color leather clean, the smooth leather in general should be color, professionally known as finishing. Is to use paint, resin-based material such as leather dubbed special coating slurry, in order to brush, wipe, spray the surface of leather, etc. Apply a way. Finishing is the key to good or bad the quality of leather and maintenance. Leather and maintenance should be done, we must understand the use of all of the characteristics of materials and to develop a reasonable amount of formula may make maintenance after the leather quality. If the maintenance after the leather handle, gloss levels than before and better, indicating finishing formula is reasonable; the other hand, maintenance of hair after the leather feel hard, sticky, indicating improper coating formulations. Typically, the color must be carried out before the color, trial color, and then finishing, solid color.

1. Color to the leather color before, we should first color. The so-called color, is to use some of the basic cream, first call up with basically the same as leather color of main colors, and then transferred the Deputy hue (color head), until the color and the leather is very similar, matched with a small amount of resin, and mix thoroughly after the leather a conspicuous place on the corner, which do not transfer well coated with cream, dry observation coated colors and leather color is close, color, only after very close to finishing. Resin can also be used with a good basic colorants direct color and test color, so that is convenient, and accurate color.

2. Finishing Finishing the former should first good cream and resin transfer according to a certain percentage (usually the ratio of pigment and resin 1:2-2.5) with a good mix thoroughly and then to color.

usually take the finishing methods are brushing, coating and spraying three kinds of arrangements.

(1) Brush: means the use of scrubbing brush dipped into the coating slurry directly to the surface of a brush for leather finishing method. Brush help slurry in the pores, corners and seams in the full penetration and absorption.

(2) arrangements will be coated: refers to the sponge dipped into the coating slurry directly to wipe the surface of a catch on the leather finishing method. Wipe thin film coating, but also conducive to the infiltration of slurry, but the corner is not easy to eat into the grout joints, easy there, Lu at the end.

(3) Spraying: refers to the spray gun to spray coating slurry directly on the leather surface of a coating method. This method is more brushing, arrangements will be coated are higher efficiency, but also to avoid brushing and wipe traces of coated printing, color is uniform. However, when spraying for the leather lining of the corner site is not a good spray, easy to pollution lining. Usually take when stencilled with a better way. Right on the lust of the leather, but also for solid-color processing, to prevent fade. Fixing materials commonly used formaldehyde, Varnish, cross-linking agent. As with the cross-linking agent-solid color, generally the cross-linking agent added directly in the coating slurry. After coloring the leather, such as wrinkles around the body or the main part of a formation, it is best to use iron for ironing processing to make it more smooth appearance. Ironing, it is best in the leather surface of a silk pad, ironing temperature control in the range of 80-100 ℃ better, each and every such ironing time should not be too long, to prevent some of the paint coating after the heat migration and lead to color flower, light-colored leather in particular should pay attention. Finally, should also be buttons on the infected parts of the color rub off with a damp cloth only after delivery.

Answer:
The easiest way is to the supermarket to buy a wall Franc sprayed with a rub on the list05-01-24

Tags: , ,

郑重声明:资讯 【PU革服装如何保养和清洁? « Live in China 混在中国】由 企业资讯策划团队 发布,版权归原作者及其所在单位,其原创性以及文中陈述文字和内容未经(企业库www.qiyeku.com)证实,请读者仅作参考,并请自行核实相关内容。若本文有侵犯到您的版权, 请你提供相关证明及申请并与我们联系(qiyeku # qq.com)或【在线投诉】,我们审核后将会尽快处理。
会员咨询QQ群:902340051 入群验证:企业库会员咨询.
免费注册只需30秒,立刻尊享
免费开通旗舰型网络商铺
免费发布无限量供求信息
每天查看30万求购信息
中山市八喜电脑网络有限公司版权所有 © 2006-2022     客服:0760-23776398      粤ICP备11060901号      免责声明     举报     平台资质