粘合机带的种类：无接缝（ptfe）粘合机带、有接缝粘合机带、双层复合机带等
PTFE无接缝粘合机带：
无缝带采用高强度玻璃纤维纱或凯芙拉（芳纶）经圆织设备编织筒状织物，采用独特的工艺技术涂覆特氟龙树脂（PTFE）制成的。它克服以往输送带接口连接处易断裂的现象。连接处周长不等而造成走行稳定性差、跑偏现象。无缝粘合机带运转寿命比rh接法的特氟龙输送带寿命都要长3倍以上。
粘合机带的耐温范围：长时间工作-70至320℃
无接缝粘合机带主要性能特点：
1、用于低温-196℃，高温300℃之间，具有耐气候性,抗老化。经实际应用,如在250℃高温情况下，连续放置200天，不但强度不会变低，而且重量也不减少；在350℃ 高温下放置120个小时，重量只减少0.6%左右；在-180℃超低温情况下并可保持原有的柔软性。
2 、非粘着性：表面光滑,不易粘附rh物质。易于清洗附着其表面的各种油渍、污点或其它附着物；浆糊、树脂、涂料等几乎所有粘着物质都可简单地qc；
3、耐化学腐蚀，能耐强酸、强碱、王水及各种有机溶剂的腐蚀。
4、耐药剂性、md性。几乎可耐所有药剂物品.
5、具有高绝缘性能（介电常数小：2.6，正切在0.0025以下）、防紫外线、防静电。
6、使用方便、使用寿命长。
7、尺寸稳定性好（延伸系数小于5‰）、强度高。具有良好的机械特性。
8、抗弯曲疲劳，可用于较小轮径。
9、防火阻燃
粘合机带应用范围：
A：广泛应用于带式压烫粘合衬布的机械配套
B： 各种食品烘焙、冷冻食品解冻（米饭、年糕、糖果等）
C：各种电子元件焊接输送机械配套
D： 工业药品、橡塑胶片、电器零件热处理、耐热及非粘着的特殊条件运输带
E： 汽车零件的防锈粘结剂涂履运输、带有酸、碱、及其腐蚀物品的运输带
粘合机带规格：带子“宽度、长度、厚度”可根据客户要求定做。
粘合机带颜色：棕、黑
粘合机带周长：1360---6700MM
Teflon seamless fusing machine belt.PTFE Teflon Seamless Fusing Belt/Hashima/Oshima/Meyer/Martin/Malkan Fusing Belt..
Teflon seamless fusing machine belt.PTFE Teflon Seamless Fusing Belt/Hashima/Oshima/Meyer/Martin/Malkan Fusing BeltTeflon seamless fusing machine belt/PTFE Endless Fusing Belt
Teflon Seamless Fusing Belts are made of high strength fiberglass or Keviar,knitted by special equipment and coated with Teflon resin in high temperature. Seamless belts solve the problems of traditional fusing belts with joint such as bad stability, ruptures and deflecting for different girth on two sides at the joint. The seamless fusing belts have a smooth surface,excellent antistatic effect, long life using etc.advantages that other seam fusing belts donnt have ..
We suuply several types fusing machine belt
1. PTFE seamless fusing machine belt:
the belt is made of high tensile fiberglass or Kevlar, knitted by special equipment and coated with fine PTFE. Seamless belt overcomes former problems of traditional joint fusing machine belt such as bad stability, ruptures, and deflecting for different girth on two sides at the joint. The using life of seamless PTFE Fusing Machine Belt are much longer than all kinds of joint PTFE Fusing Machine Belt.
2.2ply fusing machine belt:
with static-resistance varnished cloth inside and tearing-resistance fiberglass cloth outside, 2ply belt has a great improvement on its intensity, long using life, well balanced thickness, excellent deflecting preventing capacity, smooth surface, its better for super thin fabric fusing.
mon seam fusing machine belt:
Seam fusing machine belt is made of fine material. The surface is smooth and luster and the price is competitive. It can substitute imported high price belts.
Features of PTFE fusing machine belt:
1)High temperature resistance and adherence resistance;
2)Good tensile strength, preventing deflecting;
3)Excellent capability of resistance of static;
