石材抛丸除锈机
石材抛丸机：
根据不同粗糙度要求将不同粒径的钢丸高速射到板材表面，冲击力巨大的钢丸迅速把石材表面剥蚀成立体感很强的表层。用这种方法加工出来的产品，不但质量不乱，外表美观没有盲区，而且加工速度快，成本低。与机刨、烧毛等工艺相比，这种方法极具竞争力，在石材领域有着广泛的应用远景。
The products processed by this method are not only of good quality, but also have beautiful appearance without blind area, and the processing speed is fast and the cost is low. Compared with machine planing and singeing, this method is highly competitive and has broad application prospects in the field of stone.
?? ???? ???? ?? ??? ???? ?? ??? ?? ???? ? ??? ???? ?? ??? ?? ??? ?? ??? ?? ????.?? ???? ??? ??? ??? ???? ?? ?? ???, ???? ??? ??? ??, ?? ??? ???, ??? ??.?? ??, ?? ? ?? ? ?? ? ?? ? ??? ? ? ??, ?? ?? ?? ???? ?? ???? ??.
石材抛丸除锈机价格
石材抛丸除锈机
路面抛丸机主要解决混凝土面层处理时的缺陷，它能够一次将混凝土表面的浮浆、杂质清理qc，
并且可以对混凝土的表面进行打毛处理，使其表面均匀粗糙，大大提高了防水层和混凝土基层的黏着强度，以便防水层和桥面更好的结合，同时也能够将混凝土的裂纹充分暴露出来，起到防患于未然的作用。
The pavement blasting machine mainly solves the defects in the concrete surface treatment, and it can clean up the floating slurry and impurities on the concrete surface once and for all.
And the surface of the concrete can be treated with hair, so that the surface of the concrete is even rough, greatly improving the adhesive strength of the waterproof layer and the concrete base, so that the waterproof layer and the bridge surface can be better combined. At the same time, the cracks in the concrete can be fully expsed.
?? ??? ?? ?? ?? ???? ?? ?, ?, ??, ???? ??? ?? ????, ?? ? ?.
, ???? ?. ??, ??? ???? ? ? ??, ?? ?? ??? ???? ?? ???, ??? ???, ?? ? ?? ?? ??.???, ???? ?? ? ?? ??? ????.
石材抛丸除锈机价格
石材抛丸除锈机
作方式
工人把需要喷砂加工的接箍装在自动喷砂机操作位的小转盘上面、启动自动喷砂开关、气缸门自动打开后、大转盘公转把待喷砂的接箍转到喷砂位、气缸门自动关闭、喷沙枪开始自动上下往复式对接箍内螺纹喷砂处理、工人在操作位装卸工件、喷砂完成后气缸门自动打开、大转盘公转把喷好的产品转到操作位、待喷的产品转到喷砂位依次循环连续喷砂作业、生产效率高工人的劳动强度低。
Mode of work
The workers put the hoop that needs sand blasting on the small rotary table of the automatic sandblasting machine, start the automatic sandblasting switch, the cylinder door automatically open, the large turntable turn to turn the hoop to the sand jet, the cylinder door automatically closed, the sand blasting gun began to automatically go up and down the reciprocating hoop, and the inner thread sandblasting treatment, the worker in the The operating position, loading and unloading of the workpiece, the automatic opening of the cylinder door after the completion of the sand blasting and the rotation of the large turntable turn the sprayed products to the operating position, and the products to be sprayed are transferred to the sand blasting position in order to circulate continuous sand blasting operation in turn, and the labor intensity of the workers with high production efficiency is low.
??
??? ? ?? ?? ?? ? ? ? ?? ?? ? ?? ? ?? ???? ? ? ?? ?? ?? ???, ?? ?? ? ?? ?? ?, ??? ?? ? ? ? ?? ? ? ?? ?? ? ?? ?, ??? ? ?? ??, ?? ? ?? ?? ??? ? ?? ?? ? ?? ? ?? ??, ??? ? ???? ?? ?? ??, ?? ?? ?? ? ?? ??? ? ?? ? ?, ? ?? ?? ? ? ?? ??, ?? ?? ? ?? ? ? ???? ?? ?? ??, ?? ?? ? ??? ? ?? ?? ?? ??.
石材抛丸除锈机价格
