OR-102A 电脑通道真空加硫机

1. 数控电脑操作系统，设有报警装置，操作简单方便安全。

2. 采用德国先进节能系统，性能稳定，比传统加硫机和热定型机节能60%以上。

3. 抽真空时间为1~3分钟，温度可依材质不同而调整，适用于单鞋、靴子、凉鞋等不同鞋型没同皮料的各种鞋子。

4. 双循环除皱系统，除皱效果更明显。

5. 立体分层式鞋架在同一直线上平稳输送，鞋子不易歪斜掉出导致磨损。

6. 放靴空间大，放鞋方便，快捷；与传统烤箱比，做马靴的产量可增加一半。

7. 采用德国微波纳米双循环加硫定型系统，多个鞋架重复循环运行，周转时间快，节能省楦。

8. 定型速度快，1~3分钟即可完成一箱鞋子的定型，效率高。

1. equipped with CNC operating system and alarem device,it is convenient,safe and easy to operate,

2. it adopts the advaced german energy-saving system which is more stable and saves more than 60% of the energy compared with traditional vulcanizing machine

and heat shaping machine

3. the shaping time is about one to three minutes, and the temperature can be adjusted according to different leather mateials, therefore. it is applicable to all kinds of

leather shoes like boots,sandals etc,

4. it adopts the two-cyle wrinkle-removing system with obvious wrinkle-removing effect.

5. vertically layered shoe rack can transfer shoes stably on the same straight line and thus shoes will not easily fall out and cause damage.

6. the space for shoes is large and it's easy to place shoes.compared with the traditional oven,the output can be increased by half.

7. german namometer micro-wave two-cycle vulcanizing and setting system is used and several shoe racks can run repeatedly in cycle ing short turmover time, thus

saving power and usage of the last.

8. fast setting speed and high efficiency,one case of shoes can be shaped within 1-3 minutes.